The Ultra Series Window Films utilise up to 42 micro-layers to provide immense strength and tear resistance compared to standard films. In the case of glass breakage, the fragments are held on the film by the strong acrylic adhesive system. The film delivers superior performance over standard polyester films in blast and impacts, yet still maintains a high level of optical clarity.
| Product | Visible Light Transmitted | Visible Light Reflected | Tensile Strength ASTM D882-95a | Elongation at break ASTM D882-95a | |
|---|---|---|---|---|---|
| Ultra S400 | 86 | 11% | 206 N/mm² | 140% | Enquire now |
| Ultra S600 | 84 | 10% | 206 N/mm² | 140% | Enquire now |
Figures above are for single pane clear glass. Please download the PDF below for detailed performance information.
Click to view or right-click and save
3M Window films are installed using a water and soap solution. Full adhesion is reached after approximately 20 days at 18°C (in dry conditions).
3M Window films may be cleaned 30 days after installation using ordinary window cleaning agents and avoiding the use of abrasive products. Do not use rough sponges, cloths or brushes. Synthetic sponges, soft wipes or rubber squeegee cleaners are recommend.
